PLA Lash Lift 1 Shot Pack

Regular price $6.50
/
Shipping calculated at checkout.

Interested in sampling PLA’s Lash Lift solution? The PLA Lift 1 Shot Pack offers you a sample of one sachet of the Perm Lotion, one sachet of the Fix Lotion, and one sachet of the Nourish Lotion that you can use on up to two clients.


Fast Facts:

  • 1 Perm Lotion Sachet
  • 1 Fix Lotion Sachet
  • 1 Nourish Lotion Sachet
  • Results can last up to 8 weeks
  • All products are vegan and cruelty free

Lash Lift Prep Directions:

Patch Test

To minimize the risk of an irritation or reaction, perform a patch test on the skin 48-72 hours prior to service. Test all products behind the ear or in the crook of the arm by placing a small amount of each product and leave on the skin for ten minutes.

Assess Lashes

Lashes must be processed using the correct timing to prevent damage from overprocessing. Processing time for Lift and Set are both 5-8 minutes depending on hair type:

Very Fine Lashes - 5 minutes

Fine Lashes - 6 minutes

Medium lashes - 7 minutes

Thick lashes - 8 minutes

Cleanse

Remove all traces of makeup with a remover.

Cleanse your client’s brows with a cleanser such as Prolong or PLA Sterile Cleanser.

Dispense cleanser and use a disposable applicator to thoroughly clean the lashes and eye area.

Rinse the lashes and eye area well to remove all traces of the cleanser.

Apply Eyepad and Tape

Apply eyepad and tape to protect the lower lashes and skin.

Lash Lift Directions:

Lash Lift Rod Application

Select either Standard, Flex or Flowers Lash Lift Rod for desired curl, selecting the size according to the length of the natural lash.

Using a clean applicator (do not double dip), coat the Standard, Flex or Flowers Lash Lift Rod with PLA Lash Lift & Brow Adhesive. This will allow the Standard, Flex or Flowers Lash Lift Rod to stay in place during application.

Apply the Standard, Flex or Flowers Lash Lift Rod as close to the lash line as possible without gaps between the lash line and Standard, Flex or Flowers Lash Lift Rod.

Hold the Standard, Flex or Flowers Lash Lift Rod down until it has set.

Repeat on the second eye using a new applicator.

Attaching lashes onto Standard or Flowers Lash Lift Rod

Use a clean applicator and dip into the PLA Lash Lift & Brow Adhesive or the Ultimate Lash Lift Adhesive.

Starting on the inner corner section, apply the Adhesive in a small section. Paint the natural lashes onto the Standard, Flex or Flowers Lash Lift Rod.

Use the PLA Lifting Tool to pull the lashes onto the Lash Lift Rod, ensuring they stick. Then use a Y Comb or your Lifting Tool to straighten lashes and separate them to ensure they have not crossed over each other.

Repeat for remaining lashes

Note: do not apply too much adhesive otherwise it will take longer to set.

Step 1: Perm

Start timer, know that you should begin a timer for each step as you start, because lotions will begin working as soon as they are placed on the lashes.

Dispense half the package of PLA Perm Lotion into a PLA Tint Dish.

Starting on the inner corner, use a microbrush to quickly apply the PLA Perm Lotion to the base of the natural lash using a dabbing motion. Continue to bring the PLA Perm Lotion upwards to mid-lash, moving quickly. Keep Lotion away from the tips of the natural lash.

Start timer and repeat on the second eye.


Remove PLA Perm Lotion with a clean applicator, by wiping in an upwards motion to remove all Lotion. Repeat with the second eye when time is up.

Step 2: Fix

Start timer.

Dispense half the package of PLA Fix Lotion into an unused well in the PLA Tint Dish

Starting on the inner corner, use a micro brush or applicator to cover the entire lash with a generous amount.

Start a timer and repeat on the second eye.


After the timer ends, remove PLA Fix Lotion with a clean applicator, by wiping in an upwards motion to remove all Lotion. Repeat with the second eye when time is up.


Step 3: Nourish

If no tint is required, apply PLA Nourish Lotion with a clean applicator using the same timing for Step 1 and Step 2 on both eyes.

Remove Lash Lift Rod from the eye.

WARNING

This product may cause severe allergic reaction This product is not intended for use on persons under the age of 16. Do not use after former allergic reactions. Wear suitable gloves during application. Avoid contact with the eyes. Keep out of reach of children. Use for eyelashes only. This product is intended for professional use only. Do not use for self application.

MSDS

MSDS |MATERIAL SAFETY DATA SHEET                                  

Section 1 – Chemical Product and Company Identification

MSDS NAME

Lash Lift  Step 3

COMPANY ADDRESS

1285 Financial Blvd

Reno, Nevada

 

Tel:775-440-1208

 

Lash Lift  Step 3

 

Section 2 – Composition and Ingredient Information

 

Ingredient Component Name

Aqua 7732-18-5

2-Ethylhexyl Palmitate 29806-73-3

Styrene/Isoprene Copolymer 25038-32-8

Vitamin E 2074-53-5

Avocado oil 8024-32-6

Keratin 68238-35-7

Phenoxyethanol 122-99-6

Cetearyl Alcohol 67762-27-0

Glycerol Monostearate 31566-31-1

  

Section 3 – Hazards Identification  

 

Hazard Risk Classification

 

N/A

 

 

 

Eye: Rinse cautiously with water for several minutes and obtain medical advice

 

Skin:  No expected adverse effects, if there is discomfort, wash with water, seek medical attention

 

Inhalation: No harm from vapors appear at normal working temperature. If a reaction to odours occur move client to inhale fresh air and consult a doctor immediately

 

Ingestion: Rinse mouth with water and obtain medical advice or consult with poison control. do not induce vomiting. Never give anything by mouth to an unconscious person

 

 

 

 

 

Section 4 – First Aid Measures

 

Inhalation

No harm from vapors appear at normal working temperature. If a reaction to odours occur move client to inhale fresh air and consult a doctor immediately

 

Eye Contact

Rinse cautiously with water for several minutes and obtain medical advice

 

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

 

Ingestion

Consult a doctor immediately.

 

 

 

 

 

 

Section 5 – Fire Fighting Measures

 

Specific Hazard

N/A

Flash Point

N/A

 

Auto Ignition temperature

N/A

Flammable/Explosive Limits-lower%

N/A

 

Flammable/Explosive Limits-upper%

N/A

 

Hazardous Decomposition Materials

N/A

 

Suitable Extinguishing Media

Dry powder, chemical foam, carbon dioxide, Water mist

 

Protective Equipment

Wear a self-contained respiratory protective device.

 

Hazardous combustion products

N/A

 

Unusual fire or explosion hazard

N/A

 

Section 6 – Accidental Release Measures

 

Environmental precautions

 Do not empty into drains. If the product contaminated lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations

 

Disposal and Clean Up

Remove by liquid absorbing material. Adhered or collected material should be promptly disposed of.

 

Personal Precautions

Protective equipment and emergency procedures Ensure adequate ventilation

 

 

 

 

 

 

 

Section 7 – Handling and Storage

 

Handling Precautions

Keep away from heat and fire.

Keep indoor ventilation or local exhaust device

Avoid sun exposure

 

 

Storage

Store in cool, dry, well-ventilated place. Keep containers secretly closed when not in use. Keep in cool, do not store with incompatible material

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and solven vapour below the OEL, suitable respiratory protection must be worn

 

Respiratory Protection

No special protection is required under normal conditions. Wear a filter mask when necessary

 

Skin Protection


No special protection is required under normal conditions. Wear protective glasses when necessary

 

 

Eye/Face protection

Do not get into eyes. No special protection is required under normal condition

 

Section 9 – Physical and Chemical Properties

 

Physical State

Lotion

Odour

Slight

pH

8

Specific Gravity

N/A

Boiling Point

N/A

Flash Point

85℃

Flammability

N/A

Evaporation Rate(Ether=1)

N/A

Ignition Temperature

NA

Melting/Freezing Point

N/A

Solubility

N/A

Vapour Density

N/A

Vapour Pressure

N/A

Volatile Organic Compound(EPA Method24)

N/A

 

Section 10 – Stability and Reactivity

 

Stability

Stable under recommended storage conditions

 

Conditions to Avoid

High Temperature

 

Incompatible Materials

Strong oxide, acid and alkali

 

 

Hazardous Polymerization

N/A

 

Hazardous decomposition

 

 

 

 

 

 

 

 

 

NA

Section 11– Toxicological Information   

Acute toxicity: No information found.
Skincorrosion/irritation: No information found.
Seriouseyedamage/irritation: No information found.                                                                   Respiratory or skin sensitisation: No information found.                                                                          Germcellmutagenicity: No information found.
Carcinogenicity:No information found.   
 Reproductive toxicity: No information found.

STOT-singleexposure: No information found.
STOT-repeatedexposure: No information found.
Aspiration hazard:No information found.                                                                        

 

Section 12– Ecological Information

 

Ecotoxicity

N/A

Persistence/Degradability

Biodegradeable

Bioaccumulative Potential

No data available

Mobility in Soil

According to the chemical composition, does not contain heavy metals and substances classified as dangerous for the environment.
      

 

Section 13– Disposal Consideration

                                               

WASTE DISPOSAL:

Dispose of in accordance with local regulations. This material is not considered hazardous waste

HAZARDOUS WASTE NUMBERS: N/A

 

Section 14– Transport

                                                                                                                       

This product is not a hazardous material                      

Section 15– Regulatory Information

           
Hazardous Chemical Catalog

International Maritime Dangerous Goods code

Dangerous Good Number of United nations

Technical instructions for the Safe Transport of Dangerous good by air

Classification and code of danger goods

Occupational Safety and Health Act (OSHA)

The principle of classification of Transport Packaging Groups of Dangerous goods

Globally Harmonized system of classification and labeling of chemical in accordance with local laws


Section 16– Other Information

 

DISCLAIMER:

All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use.

Lash Lift  Step 3