PLA Henna Brow Scrub
Regular price $12.50 Sale price $8.75 Save 30%Use the PLA Brow Scrub to help cleanse the skin and remove excessive oil and skin cells from the area before applying PLA Henna Brow products.
Fast Facts:
- 30 mL container
Henna Prep Directions:
- Cleanse your client’s brows with Sterile Cleanser such as Prolong or PLA Sterile Cleanser.
- Use PLA Brow Scrub to exfoliate the area before application. Fully rinse.
- Using the PLA White Pencil, map desired brow shape on client before application.
- Proceed with Henna Brow Application process.
Warning: this product is intended for professional use only. Do not use it for self application.
MSDS
Section 1 – Chemical Product and Company Identification
MSDS NAME |
Brow Scrub |
COMPANY ADDRESS |
1285 Financial Blvd Reno, Nevada Tel:775-440-1208 |
FOR REMOVING EXCESSIVE OIL AND SKIN CELLS ON EYEBROW |
Section 2 – Composition and Ingredient Information
Ingredient Component Name
DEMINERALISED WATER 7732-18-5
GLYCERYL MONOSTEARATE 31566-31-1
SODIUM COCOYL GLUTAMATE 68187-32-6
LIGHT LIQUID PARAFFIN OIL 8042-47-5
CETYL PALMITATE 540-10-3
CETYL ALCOHOL 36653-82-4
CETOSTEARYL ALCOHOL 67762-27-0
PROPYLENE GLYCOL 57-55-6
GLYCERIN 56-81-5
WALNUT GRAINS 84012-43-1
JOJOBA EXTRACT 90045-98-0
NEEM EXTRACT 84696-25-3
PERFUME 107-12-0
EDTA 6381-92-6
Section 3 – Hazards Identification
Eye: Irritating to eyes. Rinse immediately with water. Skin: Wash off with soap and water. If irritation persists then call a physician. Inhalation: May cause respiratory tract irritation. Ingestion: Drink lots of water and call poison control if ingested |
|
Section 4 – First Aid Measures
General Information |
Immediately rinse any splashes on the skin and clothing. |
After Inhalation |
Move to fresh air. If symptoms persist, call a physician. If breathing stops, give artificial breathing and call for medical help immediately. |
Skin Contact |
Wash off with soap and water. If skin irritation persists, call a physician. |
Eye contact After ingestion |
Hold Eyelids and rinse eyes immediately with plenty of water and seek medical advice. Do not induce vomiting. Clean your mouth with water and drink plenty of water afterwards. Call a physician or poison control center immediately. |
Section 5 – Fire Fighting Measures
Specific Hazard |
N/A |
Flash Point (C) |
>203°F (95 °C) cc, ISO 3679 |
Auto Ignition temperature |
N/A |
Flammable/Explosive Limits-lower% |
N/A |
Flammable/Explosive Limits-upper% |
N/A |
Hazardous Decomposition Materials |
N/A |
Suitable Extinguishing Media |
N/A |
Protective Equipment |
Wear Dust mask, goggles, face shield, and pvc gloves |
Hazardous combustion products |
N/A |
Unusual fire or explosion hazard |
N/A |
Section 6 – Accidental Release Measures
Environmental precautions |
Do not flush into surface water or the sanitary sewer system. Avoid subsoil penetration. |
Disposal and Clean Up Personal Precautions |
Wipe up with absorbent material. After cleaning, flush away traces with water. Ensure adequate ventilation. Avoid contact with skin, eyes, and clothing. Do not breathe in vapours. |
Section 7 – Handling and Storage
Handling Precautions |
Avoid contact with skin and eyes. Wear protective equipment. Don’t ingest. |
Storage |
Storage temperature is ambient and no special storage or shipping information |
Section 8 – Exposure Controls and Personal Protection
Engineering Controls |
Handle in well ventilated areas. |
Respiratory Protection |
No independent respiratory equipment is required. |
General Protective and |
the usual precautionary measures should be adhered to while handling the chemicals |
Eye/Face protection |
Face mask and safety glasses should be worn. |
Skin Protection Wear protective gloves and protective work equipment
Section 9 – Physical and Chemical Properties
Physical State |
Cream |
Odour |
Herbal Fragrance |
pH |
6.0-10.0 |
Specific Gravity |
N/A |
Boiling Point |
N/A |
Flash Point |
>203°F (95 °C) cc, ISO 3679 |
Flammability |
N/A |
Evaporation Rate(Ether=1) |
N/A |
Ignition Temperature |
NA |
Melting/Freezing Point |
N/A |
Solubility |
N/A |
Vapour Density |
N/A |
Vapour Pressure |
N/A |
Volatile Organic Compound(EPA Method24) |
N/A |
Section 10 – Stability and Reactivity
Shelf Life |
Stable under recommended storage conditions |
thermal decomposition/ conditions to be avoided |
cool and dark place required. |
dangerous reactions |
no dangerous reactions known |
dangerous products of decomposition |
no dangerous decomposed products known. |
Section 11– Toxicological Information
acute toxicity : harmful if swallowed. (calculated )
corrosive and irritant effects:
eye irritation: irritating to eyes. (risk of serious damage to eyes.)
skin irritation: irritating to skin.
irritating to the respiratory system.
sensitising effects: may cause sensitization by skin contact. may produce an allergic reaction
additional toxicological information: -
carcinogenicity: no carcinogenic
mutagenicity: not available
Section 12– Ecological Information
Ecotoxicity |
Contains substances very toxic to aquatic organisms |
Persistence/Degradability |
Some constituents are not readily biodegradable. |
Further Information |
Ecological injuries are not known or expected under normal use. |
Section 13– Disposal Consideration
WASTE DISPOSAL:
- Waste must be disposed of in accordant with federal state & local environmental control regulations.
Section 14– Transport
Road (ADR/RID: Not classified as dangerous in the meaning of transport regulations.
Air (IATA/ICAO): Not classified as dangerous in the meaning of transport regulations.
Sea (IMDG): Not classified as dangerous in the meaning of transport regulations.
Section 15– Regulatory Information
This safety data sheet complies with the regulatory requirement
Section 16– Other Information
DISCLAIMER:
All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use