PLA Cream Adhesive Remover - Large

Regular price $20.00
Shipping calculated at checkout.

PLA Cream adhesive remover designed to help safely dissolve adhesive bonds in professional eyelash extensions without damaging the natural lash. Cream removers are gentle on the eyes and very effective in softening cyanoacrylate.

Cream remover has a shelf life of 6 months opened, as long as it does not dry out.

NET 10g


  • Avoid contact with skin.
  • Apply with micro-swab.
  • Allow cream remover to sit on lashes for ten minutes.
  • Easily remove lashes by “sandwiching” between two eyepads, or remove with tweezers.
  • Wipe clean with a cotton swab and wash away any residue.
  • Rinse before reapplying new lash extensions.

For more information, please watch this video.

Warning: this product is intended for professional use only.

Liquid products, including adhesive, primers, bonders, and cream based products cannot be returned.



MSDS |MATERIAL SAFETY DATA SHEET                                  

Section 1 – Chemical Product and Company Identification


 Cream Adhesive Remover


825 Maestro Drive

Reno, NV 89521, USA





Section 2 – Composition and Ingredient Information


Ingredient Component Name

Squalane (Vegetable)

CAS Number 111-01-3



CAS 122-99-6


Hydroxypropyl Methylcellulose

CAS Number 9004-65-3



CAS Number 1302-78-9


Propylene carbonate

CAS Number 108-32-7



CAS Number 111-90-0


Sorbian Isostearate

CAS Number 71902-01-7


Vitis Vinfera (Grape) Oil

CAS Number 8016-21-5





Section 3 – Hazards Identification   

Hazard Risk Classification


Category 1

Potential Health Effect

Eye: May cause eye irritation


Skin: May cause skin irritation

Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated


Ingestion: May cause digestive tract disturbances. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.



Chronic: No information found


For additional information on toxicity, please refer to section 11

Section 4 – First Aid Measures



If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen


Eye Contact

In case of contact, immediately flush eyes with large amounts of water for at least 15 minutes.


Skin Contact

In case of unexpected irritation, immediately wash skin with soap and large amounts of water



If swallowed, wash out mouth with water provided person is conscious. Call a physician





Section 5 – Fire Fighting Measures


Specific Hazard


Flash Point



Auto Ignition temperature



Flammable/Explosive Limits-lower%

Not determined


Flammable/Explosive Limits-upper%

Not determined


Hazardous Decomposition Materials



Suitable Extinguishing Media

For small fires, use products such as alcohol foam, dry chemical, or carbon dioxide .

Protective Equipment

For large fires, apply water from as far as possible. Use very large quantities of water as a mist or spray of water may be ineffective. Cool all affected containers with large quantities of water.


Hazardous combustion products

Trace amount of toxic and or irritating fumes may be released and the use of breathing apparatus is recommended.


Unusual fire or explosion hazard



Specific Hazard(s)

Combustible liquid. Emits toxic fumes under fire conditions.


Section 6 – Accidental Release Measures


General Information

Use proper personal protective equipment as listed in section 10


Environmental precautions

Spills and leaks absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container.



Disposal and Clean Up

Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.


Section 7 – Handling and Storage


Handling Precautions

Keep away from heat, sparks and flame. Wash thoroughly after handling



Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed


Section 8 – Exposure Controls and Personal Protection

Engineering Controls


Respiratory Protection


Skin Protection


Eye/Face protection


General Hygiene measures

Wash contaminated clothing before reuse. Wash thoroughly after handling





Section 9 – Physical and Chemical Properties


Physical State

Pink cream/pastes




Not available

Specific Gravity

Not available

Boiling Point

Not available

Flash Point

Not available


Not available

Evaporation Rate(Ether=1)


Ignition Temperature

Not available

Melting/Freezing Point

Not available


Soluble in Water

Vapour Density

Not available

Vapour Pressure

Not available

Volatile Organic Compound(EPA Method24)

Not available


Section 10 – Stability and Reactivity



Stable under normal temperatures and pressures


Conditions to Avoid

None listed


Incompatible Materials

None listed


Hazardous Polymerization

None listed


Hazardous decomposition

None listed


Section 11– Toxicological Information

Toxicity: Skin contact may cause irritation but not allergenic effect.Routes of Entry: Inhalation (Yes), Skin (Yes) , ingestion (No) Carcinogen etc: See No. 3


Section 12– Ecological Information

No data available

Section 13– Disposal Consideration

No data available

Section 14– Transport

INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) :This product is not classified as dangerous goods, by rules of IATA.U.S Department of transportation (DOT) Shipping regulations: This product is not classified as dangerous goods, per U.S. DOT regulation under 49CFR 172.101.Proper shipping name: PRIME 6 (glue for false eyelashes)Hazard Class number and description: Not applicable identification number: Not applicable. Packing group: Not applicable


Section 15– Regulatory Information

CA Proportion 65: No California proposition 65 chemicals are known to be present.


Section 16– Other Information

To the best of knowledge, the information contained herein is accurate. However, neither our company nor any subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown.