The PLA Matrix Adhesive is great for all lash artists. Matrix ideal humidity is 40%, but has a great range for higher humidities up to 70%. The formulation of the adhesive includes ingredients that extends the adhesive, allowing the drop to last longer during appointments.

PLA’s Matrix Adhesive has a treated bottle, allowing no fumes to be emitted. This increases the shelf life and leaves a safer adhesive for both lash artists and their clients.

Each bottle has been batch tested for safety by an independent toxicologist in the UK for grades to meet EU cosmetic regulations. We test each batch to ensure consistency and performance are maintained. Blended and packaged for Paris Lash Academy in the UK.

Matrix is a great option for everyone!

Fast Facts:

• 5 mL bottle
• UK and EU registered compliant
• Low fume
• Strength: Approximately 6-7 weeks
• Stable for up to 3 months opened
• Viscosity: Thin
• Drying Time: under 1 second
• Humidity: 20%-75% humidity
• Color: Black
• Oil and water resistant.
• All PLA Adhesives are cruelty free and never tested on animals.
• Blended and packaged for Paris Lash Academy in the UK

Suggested Environment

• Ideal Temperature: 68-75 °F / 20-24 °C
• Optimal humidity is 40%-70%
• Higher humidity = quicker cure
• Lower humidity = slower cure

Ingredients:

• Ethyl-2-Cyanoacrylate, Trimethylolpropane triacrylate, Hydroquinone, Carbon Black
• No Animal Ingredients
• 100% Vegan
• Cruelty-Free
• Latex Free

Storage:

• Please store in cool, dark container or in our adhesive container with silica gel, out of UV light. Do not freeze.
• Unopened adhesive is good for 1 year.
• Once opened, adhesive is good for up to 3 months under proper storage conditions.
• Shake for two minutes before using.

Warning: this product is intended for professional use only. Do not use this adhesive for self application or to apply cluster or strip lashes.

Liquid products, including adhesive, cannot be returned. If you are unhappy with your adhesive contact our customer service via email at sales@plapro.com.

MSDS

MSDS |MATERIAL SAFETY DATA SHEET

Section 1 – Chemical Product and Company Identification

MSDS NAME	Matrix Adhesive
COMPANY ADDRESS	1285 Financial Blvd Reno, Nevada Tel:775-440-1208
Adhesive glue for applying eyelashes

Section 2 – Composition and Ingredient Information

Ingredient Component Name

Ethyl-2-Cyanoacrylate CAS No: 7085-85-0 50-100%

Trimethylolpropane triacrylate CAS No: 15625-89-5 <0.9%

Hydroquinone CAS No: 123-31-9 <0.1%

Carbon Black CAS No: 1333-86-4 0.1-1%

Section 3 – Hazards Identification

Hazard Risk Classification	Classification of the ingredients according to (EC) No. 1272/2008 (CLP): CAS No: 7085-85-0: Skin irrit. 2, H315, Eye irrit. 2, H319, STOT SE 3, H33 CAS No: 15625-89-5: Skin irrit. 2, H315, Skin sens. 1 H317, Eye irrit. 2, H319 CAS No: 123-31-9: Muta. 2, H341; Carc. 2, H351; Eye Dam. 1, H318; Aquatic Acute 1, H400; Acute Tox. 4, H302; Skin Sens. 1, H317
	Eye: Irritating to eyes. Liquid or high vapor concentration can cause pain and irritation with slight corneal injury possible Skin: Prolonged or repeated skin contact can cause irritation and dermatitis through defatting of skin. Prolonged contact can result in skin absorption Inhalation: May cause respiratory tract irritation. Ingestion: Can cause burning of nose and throat.

Section 4 – First Aid Measures

Inhalation	Supply fresh air; consult doctor in case of complaints.
Eye Contact	Rinse opened eye for several minutes under running water.
Skin Contact	Immediately wash with water and soap and rinse thoroughly.
Ingestion	Consult a doctor immediately.

Section 5 – Fire Fighting Measures

Specific Hazard	N/A
Flash Point	N/A
Auto Ignition temperature	N/A
Flammable/Explosive Limits-lower%	N/A
Flammable/Explosive Limits-upper%	N/A
Hazardous Decomposition Materials	N/A
Suitable Extinguishing Media	Carbon dioxide, sand. DO NOT USE WATER.
Protective Equipment	Wear self-contained respiratory protective device.
Hazardous combustion products	N/A
Unusual fire or explosion hazard	N/A

Section 6 – Accidental Release Measures

Environmental precautions	Do not allow product to reach sewage system or any water course.
Disposal and Clean Up	Allow to solidify. Pick up mechanically. Ensure adequate ventilation
Personal Precautions	Protective equipment and emergency procedures Ensure adequate ventilation

Section 7 – Handling and Storage

Handling Precautions	Store in a cool, dry place in tightly closed receptacles. Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace. No special measures required about fire and explosion protection.
Storage	Store in a cool location. Store only in the original receptacle. Store away from oxidising agents.Keep container tightly sealed.

Section 8 – Exposure Controls and Personal Protection

Engineering Controls	The usual precautionary measures are to be adhered to when handling chemicals. Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Avoid contact with the eyes and skin
Respiratory Protection	Not necessary if room is well-ventilated. Use suitable respiratory protective device in case of insufficient ventilation.
Skin Protection	The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. For penetration time, the exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Rubber Gloves and PVC gloves are not suitable.
Eye/Face protection	Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards.

Section 9 – Physical and Chemical Properties

Physical State	Liquid
Odour	Irritating
pH	N/A
Specific Gravity	N/A
Boiling Point	N/A
Flash Point	N/A
Flammability	N/A
Evaporation Rate(Ether=1)	N/A
Ignition Temperature	NA
Melting/Freezing Point	N/A
Solubility	Polymerised
Vapour Density	N/A
Vapour Pressure	N/A
Volatile Organic Compound(EPA Method24)	N/A

Section 10 – Stability and Reactivity

Stability	Stable under recommended storage conditions
Conditions to Avoid	Avoid exposure to exothermic polymerisation. Reacts with alcohols. Reacts with alcohols, amines, aqueous acids and alkalis. Reacts with water and acids. Reacts with amines. Reacts with water. Reacts with alkali (lyes).
Incompatible Materials	N/A
Hazardous Polymerization	N/A
Hazardous decomposition	No decomposition if used according to specifications.

Section 11– Toxicological Information

Primary routes of entry: Inhalation (Yes), skin (Yes), Ingestion (Yes)

Effects of overexposure: On the skin: Irritant to skin and mucous membranes. On the eye: Irritating effect. Sensitisation: Sensitisation possible through skin contact. The product shows the following dangers: Irritant / May cause an allergic skin reaction / Skin Sensitivity.

Ethyl cyanoacrylate: LD50 Oral at >5000mg/Kg (CICAD (2001))

Ethyl cyanoacrylate: LD50 Dermal >2000mg/Kg (CICAD (2001))

Trimethylolpropane triacrylate: LD50 Oral >5000mg/Kg

Hydroquinone: Oral LD₅₀ : 593mg/kg (Acute)

Section 12– Ecological Information

Ecotoxicity	Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Persistence/Degradability	No data available
Bioaccumulative Potential	No data available
Mobility in Soil	No data available

Section 13– Disposal Consideration

WASTE DISPOSAL:

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

HAZARDOUS WASTE NUMBERS: N/A

Section 14– Transport

DOMESTIC (D.O.T.)

DOT_HAZARD: Void

SHIP_NAME: Void

UN/NA: Void

LABELS: NONE

MARINE POLLUTANT NONE

INTERNATIONAL (I.M.O.)

DOT_HAZARD: Void

SHIP_NAME: Void

UN/NA: Void

Section 15– Regulatory Information

This safety data sheet complies with the regulatory requirement

Section 16– Other Information

DISCLAIMER:

All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use.

SUBSCRIPTION

Canceling a Subscription: To cancel your subscription, please contact us at sales@plapro.com with a minimum of 24 hours notice prior to your next billing date. This will allow us to process your cancellation request asap and ensure that it is applied to the next billing cycle.Please note that canceling a subscription does not cancel an order that has already been confirmed or stop a pending charge. If you have any questions or concerns about your subscription, please reach out to us at sales@plapro.com.

Updating Shipping Addresses: To update the shipping address for a future subscription shipment, please contact us at sales@plapro.com with a minimum of 24 hours notice before your next billing date. This will give us enough time to process your request and ensure that your order is delivered to the correct address.Please note that subscription orders that have already been confirmed with an order number cannot be edited. If you have any questions or concerns about updating your shipping address, please reach out to us at sales@plapro.com.

Updating Payment Methods: To update the payment method for your subscription, please email us at sales@plapro.com. We will provide you with a secure link to update your payment information.Please note that subscription orders that have already been confirmed with an order number cannot have payment changes. If you have any questions or concerns about updating your payment method, our customer service team is available to assist you.

Subscription Return Policy: Due to the nature of our adhesives, we are unable to accept returns or exchanges. However, if you are not satisfied with your adhesive, please contact us at sales@plapro.com.