Lash Tweezer Cleaner

MSDS NAME

AD-1 DEBONDER

COMPANY ADDRESS

1285 Financial Blvd, Reno, NV 89502

775-440-1208

FOR REMOVING DRIED GLUE ON TWEEZERS ONLY

Hazard Risk Classification

Classification according to Regulation (EC) No 1272/2008 Flammable liquids (Category 2), H225 Skin irritation (Category 2), H315 Specific target organ toxicity - single exposure (Category 3), Central nervous system, H336 Aspiration hazard (Category 1), H304 Acute aquatic toxicity (Category 1), H400 Chronic aquatic toxicity (Category 1), H410

Eye: Irritating to eyes. Liquid or high vapor concentration can cause pain and irritation with slight corneal injury possible

Skin: Prolonged or repeated skin contact can cause irritation and dermatitis through defatting of skin. Prolonged contact can result in skin absorption

Inhalation: May cause respiratory tract irritation.

Ingestion: Can cause burning of nose and throat

Inhalation

Immediately remove to open space with fresh air. Seek medical attention to treat symptomatically if discomfort persists. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Eye Contact

Rinse with copious amounts of water for at least 15 minutes. Get emergency medical assistance

Skin Contact

Flush thoroughly for at least 15 minutes. Wash affected skin with soap and water. Remove contaminated clothing and shoes. Wash clothing before re-use and discard shoes. Get emergency medical assistance

Ingestion

Ingestion is not likely. Call the local Poison control center for assistance. Contact the physician immediately. DO NOT Induce vomiting or give anything by mouth to a unconscious victim or persons having convulsions

Specific Hazard

N/A

Flash Point

NA

Auto Ignition temperature

NA

Flammable/Explosive Limits-lower%

6.7%

Flammable/Explosive Limits-upper%

1.2%

Hazardous Decomposition Materials

Carbon oxides Flashback possible over considerable distances.

Suitable Extinguishing Media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Protective Equipment

Wear self-contained breathing apparatus for firefighting if necessary.

Hazardous combustion products

NA

Unusual fire or explosion hazard

Concentrated vapors can be ignited by a high intensity heat source or flame. Toxic and corrosive gases are formed from a high intensity heat source or flame. Toxic and corrosive gases are formed on contact with flames or hot glowing surfaces

Environmental precautions

Spill or leak-wear protective clothing and use approved respirator equipment. Absorb spilled material in an absorbent recommended for solvent equipment. Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Disposal and Clean Up

Do not use cloths for mopping up. Absorb spilled material in an absorbent recommended for solvent spills and remove to a safe location for disposal by approved methods. If released to the environment, comply with all regulatory notification requirements

Handling Precautions

Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the buildup of electrostatic charge.

Storage

Store in a cool place. Keep the container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Engineering Controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Respiratory Protection

Where risk assessment shows air-purifying respirators are appropriate, use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Skin Protection

Handle with gloves. protective gloves and clothing are recommended. The choice of material must be based on chemical resistance and other user requirements. Generally, viton, polyvinyl alcohol, or neoprene offer acceptable chemical resistance. Individuals who are acutely and specifically sensitive to n-Heptane may require additional protective equipment.

Eye/Face protection

Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU)

Physical State

Clear Liquid

Odour

Faint

pH

N/A

Specific Gravity

.688

Boiling Point

98 ℃

Flash Point

-4℃ Tagliabue closed cup

Flammability

1

Evaporation Rate(Ether=1)

2.7

Ignition Temperature

NA

Melting/Freezing Point

-91 ℃

Solubility

Immiscible

Vapour Density

3.52

Vapour Pressure

40

Volatile Organic Compound(EPA Method24)

99.9%

Stability

Stable under recommended storage conditions

Conditions to Avoid

Heat, sparks, open flame, open containers, poor ventilation and moisture.

Incompatible Materials

Strong oxidizing agents - strong acids - strong bases

- strong reducing agents.

Hazardous Polymerization

NA

Hazardous decomposition

Phosgene, hydrogen chloride and chlorine

Ecotoxicity

No data available

Persistence/Degradability

No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available